MOM Error Messages

This page details problems and issues relating to MOM Error Messages.

• "0x00040ed2: Unknown error code 265938..” When Trying to Create a Script [2/10/03]

• "0x80028016: Buffer too small" Message When Creating a New Script in MOM [15/9/03]

• 21217 Application Event Errors After Manual Agent Install [21/2/03]
• "A lock violation has occurred" [13/02/04]
• "Access Violation" with an "Exception Code of 0x00000000c0000005" [25/01/04]
• "AKM Import Error ProcessRuleBulkInsertCompound Failed…" Error when Importing Management Pack [25/11/04]
• "An error occurred binding to the following AD path…" Error in the AD Management Pack [25/03/04]
• "Cannot start service. Logon failure" error when starting the OnePoint Service [14/11/05]

• "Either mailbox data is not being collected or there is no mailbox data to report" [18/02/04]

• Error 21248 "The Agent was unable to contact any Consolidator." [11/02/04]
• Error Message that MOM Reporting isn’t in Sync with the MOM Database After Installing SP1 [25/3/03]

• Event ID 9015 in Application Event Log on MOM Server [21/2/03]

• Event ID 25110 "Event and alert insertion have resumed after a recoverable error" [09/01/04]

• "Failed to create MOMLatency Monitors container" [22/12/03]

• "Failed to prepare event for insertion" Error After Installation [28/10/03]

• Getting "The Agent received no configuration from the Consolidator" Every 5 Minutes [6/8/03]

• "Incoming communications queue is full" Message on DCAMs After SP1 Install [10/05/04]

• Loads of "An unknown token name (sc-bytes) was encountered" Errors on Web Server [20/8/03]

• MAPI Errors (21403/9154/9155) linked to Exception Errors (9015) [09/02/04]

• "NetIQ XMP requires that the component mweba4.dll be successfully registered on all agent computer" [14/06/04]
• "Op Master Domain Naming Last Bind" Error After Enabling Active Directory Processing Rules Group [11/7/03]

• "script is engaged in infinite loop or hanging..." [21/7/03]

• "Snap-in Failed to Initialize" Error When Starting the MOM Administrator Console [20/05/04]

• "SQL Database: % Free Space: OnePoint SQL Free Space value =" [20/02/04]

• "The Agent Manager did not find the secondary installation directory…" [29/9/03]

• "The Agent Manager experienced an error attempting to contact computer "XXXX" while resolving the Managed Computer Rules" [01/06/04]

• "The Agent Manager manager this agent but cannot upgrade it" [20/5/03]

• "The Agent received no configuration from the Consolidator" Message After Manually Installing an Agent [27/6/03]

• "The Consolidator has received 100 events for alert {DA832E10-DBAB-4F08-B1AF-C019CC8D49F8}. Future events for this alert will not be associated with the alert." [23/7/03]

• "The Open Procedure for service "RemoteAccess" in DLL "C:\WINNT\System32\rasctrs.dll" failed." [13/07/04]

• "The report has not been generated and saved as HTML." [08/10/03]

• The script 'AD Monitor Trusts' failed to get the TrustProvider configuration object. The error returned was: "(0x80041010)". [updated 24/02/04]

• "The WMI Replication Provider is not installed" [19/5/03]

• "This rule group may not be deleted because one or more rules in the group is associated with an alert" [07/09/04]

21217 Application Event Errors After Manual Agent Install

Contributed By: Nissim Ben-Maor [MVP MOM]
If you're seeing this error on your Agents check out the 21217 Application Event Errors After Manual Agent Install article.
 

"Cannot start service. Logon failure" error when starting the OnePoint Service

"A lock violation has occurred"

Contributed By: Ugo Corti
If you’re seeing this error message in the Application Log on some of your Agents then here's what to do…  [Go to article]
 

Error 21248 "The Agent was unable to contact any Consolidator."

Contributed By: Mike Betts [MVP MOM] and Nissim Ben-Maor [MVP MOM]
If you’re seeing this error on all of your MOM Agents there’s here some advice... [Go to article]
 

Event ID 9015 in Application Event Log on MOM Server

Contributed By: Nissim Ben-Maor [MVP MOM]
If you're getting an Event ID of 9015 in the Application Event Log on your MOM server then there is a supported fix... [Go to article]
 

Event ID 25110 "Event and alert insertion have resumed after a recoverable error"

Contributed By: Mike Betts [MVP MOM]
Seeing this message on your DCAMs as they temporarily lose contact with the SQL database?… [Go to article]
 

"Failed to create MOMLatency Monitors container"

Contributed By: Paul van de Ven
Here's a workaround if you're experiencing this problem... [Go to article]
 

"Failed to prepare event for insertion" Error After Installation

Contributed By: Mike Betts [MVP MOM] and Nissim Ben-Maor [MVP MOM]
If you’re seeing this error chances are it’s nothing to worry about… [Go to article]
 

"Incoming communications queue is full" Message on DCAMs After SP1 Install

Contributed By: Baelson Duque [MSFT]
If you’re seeing the above error messages on your DCAM(s) and Event ID 21268 then this one’s for you... [Go to article]
 

MAPI Errors (21403/9154/9155) linked to Exception Errors (9015)

Contributed By: Christo Steenkamp
If you’re seeing these error messages then Outlook XP could be the culprit... [Go to article]
 

"NetIQ XMP requires that the component mweba4.dll be successfully registered on all agent computer"

Contributed By: Ugo Corti
If you’re seeing this error message then you can fix it by copying the file from another DCAM…  [Go to article]
 

"script is engaged in infinite loop or hanging..."

From the microsoft.public.mom newsgroup
If you’re getting the above errors from time to time and wondering what the cause is then let us explain… [Go to article]
 

"SQL Database: % Free Space: OnePoint SQL Free Space value ="

Contributed By: Ugo Corti and Hal Sclater
If you’re seeing this error is could be down to a corrupt SQL database…  [Go to article]
 

"The Agent Manager did not find the secondary installation directory…"

Contributed By: Mike Betts [MVP MOM]
If you’re seeing this error message then there’s nothing to worry about…  [Go to article]
 

"The Agent Manager experienced an error attempting to contact computer "XXXX" while resolving the Managed Computer Rules"

Contributed By: Nissim Ben-Maor [MVP MOM]
If you’re seeing this error message and it looks like none of your Agents are accepting Rules then here’s some help…  [Go to article]
 

"The Agent Manager manager this agent but cannot upgrade it"

Contributed By: Ugo Corti
Ever wondered why the Agent that runs on the DCAM itself is marked as "the Agent Manager manager this agent but cannot upgrade it"? and how you upgrade this to a newer version? Well wonder no more…  [Go to article]
 

"The Open Procedure for service "RemoteAccess" in DLL "C:\WINNT\System32\rasctrs.dll" failed."

Contributed By: Ugo Corti
Wondering why you’re seeing this error?..  [Go to article]
 

The script 'AD Monitor Trusts' failed to get the TrustProvider configuration object. The error returned was: "(0x80041010)".

Contributed By: Jack Kilcher and Nissim Ben-Maor [MVP MOM]
If you're seeing this error on a regular basis from MOM Agents installed on your AD servers then the OS they're running could be the reason…  [Go to article]
 

"The WMI Replication Provider is not installed"

Contributed By: Mike Betts [MVP MOM]
If you need to install the WMI Replication Provider but are wondering where to find it the answer is it's on the MOM CD…  [Go to article]
 

"This rule group may not be deleted because one or more rules in the group is associated with an alert"